Friday 28 June 2013

Eldar Hemlock Wraithfighter progress 1


Next on my work table is the new Eldar Hemlock Wraithfighter!

I got almost all the bit and pieces cleaned up and I also started to glue some of the bits together. I plan to pin the weapons of I could swap them for gaming purpose (I actually plan to field it as a Crimson Hunter for now)

As you can see from the picture I put a bunch of green stuff here and there, mostly behind the weapons mounts to extend the "pinned" area. I also made a little base for the flying stand so the model will not move too much

In the last couple of day I also finalised how I'm gonna paint it: here is a sneak peak of THE PLAN!


2 comments:

  1. Any updates or recommendations regarding assembly or pinning/magnetisation?

    Cheers,
    Alex

    ReplyDelete
    Replies
    1. I'll go with pinning for the weapons as the contact surface between the gun barrels and the hull is pretty small for a magnet to be able to keep the bits in place when you move the model around. Just put some greenstuff behing the guns mount points and drill a hole for the pin the the greenstuff is dry. I'll also suggest to build it in stages so you can paint it more easily

      Delete