Friday, 31 May 2013

Eldar Wraithguards / Wraithblades sprues - UPDATED

The new Eldar Wraithguards / Wraithblades sprues including the 3rd one currently not appearing on GW website.








UPDATE: here is a picture that show some of the differences between the 2nd and 3rd sprues. The components "type" are the same between the two but the components themselves are sculpted differently




Pubblicato da
Etichette: , , , , ,

6 comments:

  1. Stahly31 May 2013 at 13:07

    Is the third sprue really different or is it the same as the second? On your picture it seems it's the same but turned by 180 degrees, that would also explain why there are only two sprues shown on GW.com.

    ReplyDelete
    Replies
    1. A painting chaos31 May 2013 at 13:13

      I was thinking that too but it's not a 1:1 copy. It have the same components of another sprue but the components are not identical. Say, the 2 sprues have both arms or them, but the arms are posed differently. Same for the other components

      Delete
    2. A painting chaos31 May 2013 at 13:18

      I'll post a picture to show what I'm talking about in a minute :)

      Delete
  2. Anonymous22 October 2014 at 21:32

    Thanks a ton for putting up these pictures!

    I was dumb enough to simply cut out all the components, without realising that nearly ALL the parts are locked to a certain number of other parts. For instance the hip-joints all look the same, but each are slightly different.
    Now with your higher res. pictures I can try to figure out which part is which, so that I might actually put them together properly.
    To make matters worse, I thought they would be a breeze to magnetize, which just made my Wraithguard project all the more problematic :-)

    Anyways, thanks again for the pictures!

    ReplyDelete
    Replies
    1. A painting chaos22 October 2014 at 21:39

      Very happy to be of assistance :)
      I magnetized mine too (but only the arms) so I fell your pain! :)

      Delete
    2. Anonymous22 October 2014 at 21:53

      I am also just magnetizing the arms, but it's hard to even find the arm-components that fit together, let alone getting it to fit properly with the magnets.
      It seems everything on these models have such a tight fit, that even a slight change (from a magnet sticking a milimeter out or something) will make the joints not naturally end up aligned properly.

      But too late now - As I've already started the magnetizing, so I have to follow through :-)

      Delete

Subscribe to: Post Comments (Atom)